De Terra 40mm Solid Wood Worktops - Rustic Full Stave Oak

De Terra 40mm Solid Wood Worktops - Rustic Full Stave Oak

LIMITED EDITION

PLEASE NOTE: Bespoke Cutting service is not available for this worktop

Available Solid Wood Worktop sizes:

• Worktop - 2m x 635mm x 40mm
• Worktop - 2m x 960mm x 40mm
• Worktop - 3m x 635mm x 40mm
• Worktop - 3m x 960mm x 40mm
• Worktop - 4m x 635mm x 40mm

Product Information:

Material - Solid Wood

Species - Rustic Oak

Finish - Sanded (Oiling Required)

Edge Profile - Square Edge

Oiling:

We recommend finishing De Terra products with Osmo Top Oil.

Make sure the wood surface is dry and clean. The face of the worktop requires 2 coats of oil to be applied to build up a barrier against water. Allow up to 8-10 hours between coats.

After fitting, apply two coats of Osmo Top Oil for optimal coverage, following the instructions on the tin and allowing 8-10 hours between coats. For exposed end grain, like sink cutouts, a third coat is suggested for added durability. We recommend 500ml of Osmo oil per 3 linear metres of worktop. Freshly oiled wooden surfaces typically require 2-3 weeks to fully cure and properly harden before they can be used normally so it's important to be careful with your worktop during this time.

To maintain the fine quality of your solid wood worktop, be sure to oil regularly. Wood is a natural material and a proper course of oil treatment is essential to ensure a long and trouble-free life.

In the first few weeks of use, special care must be taken to prevent the worktops becoming stained before they have built up sufficient oil protection. In particular water must not be allowed to lie on the surface.

When the surface has a sheen, and water 'beads' or forms into droplets, you can tell that the worktop is in good condition. When the surface is dull and droplets don't form, you need to re-oil the worktop.

Osmo Oil Stain 125ml - Black Satin 3590

This Black Satin Osmo stain is for use with our Black Stained Oak wooden worktops on any cut edges to ensure that your worktop has the same deep colour on these and is required if you are cutting these worktops. You will still need to apply an Osmo Top Oil to maintain your worktop.

Click the link below to view the Solid Wood Installation and Aftercare Instructions

Installation & Aftercare Instructions

Click here to view the De Terra solid wood brochure

*Please note: Failure to follow these installation instructions will result in the void of any product warranty

For further information regarding the De Terra solid wood range, please call our sales helpline.

01257 446149 ( Option 1 )