Duropal Compact Laminate Worktops - Cracked Marble Plaster S63069 CM - Grey Core

Duropal Compact Laminate Worktops - Cracked Marble Plaster S63069 CM - Grey Core

Duroapal 12mm Compact Kitchen Laminate Worktops

Quality you can take for granted. Duropal worktops are easy to process and extremely durable. They offer a wide range of decors, surface structures and core materials - making them the material of choice for modern, long-lasting and hygienic kitchen design.

Duropal laminate kitchen worktops are the perfect alternative to acrylic based, granite and stone worktops at a fraction of the price.

Texture: Supermatt (CM)

Supermatt has a convincingly impressive look with a previously unknown, enormous colour transparency and depth – and a pleasantly warm, velvety soft touch.
Although the matt, low-reflection surface has a especially fine appearance, the texture is durable, resistant and easy-care. The warm “soft” surface invites you to touch it – and remains insensitive to fingermarks and traces of grease.

 12mm Compact Laminate

A thin worktop with extraordinary properties. With its simple style it reflects the latest trends in interior design. A worktop which offers extraordinary durability, reliable functionality and timeless elegance.

Available in 12mm with white, grey and black core.

Available in a selection of 12 decors.

Duropal 12mm Compact Worktops 

4100 x 640 x 12mm bevelled on 1 long edge

4100 x 950 x 12mm bevelled on 2 long edges 

4100 x 1300 x 12mm unfinished edges

HPL MDF Back Panels

Consisting of an 8mm E1 medium density fibreboard (MDF) core surfaced with genuine Duropal high-pressure laminate manufactured to EN 438. Available to match all decors, in the following size:

• 4,100x640x9.2mm nominal (8mm MDF core)

Duropal HPL Compact Upstands

Duropal HPL Compact Upstands are available in the following size:

• 4,100 x 120 x 12mm nominal, (top edge bevelled)

This accessory offers an affordable and hygienic alternative to wall tiling. Available to match the 12 decors in the Duropal Compact Worktop range.

Duropal Fitting Kit Contents:

• 1 x Scraper Tool
• 1 x 20ml Bottle of Acetone
• 9 x No.20 Jointing Biscuits
• 1 x 20ml Bottle of Linseed Oil
• 10 x Brass Spreader Dowels
• 10 x M6 x 10mm Roofing Bolts
• 9 x Toggle Bolts (Worktop Connector Bolts)
• 1 x 3mm Hex Key
• 2 x 180 Grit Sandpaper Sheets
• 2 x 240 Grit Sandpaper Sheets
• 1 x Nylon finishing pad (320 Grit approx)

Useful Links:

Click here to view the Duropal 2025-28 Worktop Collection brochure

Click here to view the cleaning recommendation guide

General guidelines for processing Duropal Worktops

• Always use sharp tools.
• Circular saw blades with flat chamfer teeth (FZ/FA) or alternating teeth (WZ) achieve best results.
• Reduce the feed rate when cutting through the postformed edge.
• Spiral router cutters achieve best results.
• For finishing edges with Duropal HPL edging strip, trim and finish with 300 grit sandpaper.

This information is for guidance only and is based on our experiences with the processing of our products, it does not give any guarantee of final results; guidelines should be adapted to the situation depending on the tools available. Your tool supplier should be consulted to assist in the selection of the correct tools for best results. This information is not intended to and shall not be deemed to constitute a guarantee by us of any kind or character whatsoever.

Contact us:

If you would like to order a sample, please see the samples tab above or click here for the samples form 

Should you require further information regarding Duropal laminate worktops or other products from the Duropal range,

please feel free to call our helpline 01257 446149 (option 1)

All prices include VAT